ArizonaHikers Portal Index
HomeHome   BoardBoard   AZH GearAZH Gear  FAQFAQ  RulesRules   SearchSearch
MemberlistMembers  ArticlesArticles  CalendarCalendar  GalleryGallery  LinksLinks      RegisterRegister
ProfileProfile   Log in to check your private messages   Log inLog in
Basic Boot information

Printable version
Categories
Tales from the Trail
Hiking
Backpacking
Hiking The Grand Canyon
Wilderness Survival
Gear Reviews
Flora and Fauna
Trail Food and Recipes
Book Reviews
 
 
Author Article
ck1



Joined: 04 Jan 2003
Articles: 9
Comments: 0
Location: Mesa
 Posted: 8/24/2003, 11:06 pm

Let’s take a look at the anatomy of a hiking boot. A better understanding of the make-up of a boot allows for a more informed consumer. Backpacker, Outside and Trail Runner magazines as well as several boot manufactures websites were consulted for this article.

The outside of the boot is surrounded with what is called the upper. The material the upper is made from varies. The most common would be leather. Leather generally comes in full grain or split grain. Full grain tends to be tougher and more water resistant. Split grains are lighter. Another product used in uppers is called nubuck, which is basically full grain leather that has been treated. A boot with a Gore-tex lining is considered to be waterproof, but also tend to be warmer. Manufactures have many different names for what amounts to their own breathable liner within the upper. Uppers come in three general sizes: low, mid/medium/midheight, and high cut. Although personal preference dictates most decisions on uppers, the general rules regard support. A high cut boot provides maximum ankle support. It is for this reason that backpackers with heavy loads wear high cut boots. Day hikers tend to wear low or mid cut uppers. Again, personal preference dictates the ideal boot upper. Those with weak ankles tend to lean toward a high upper.

The internal layer of the boot is called the foot bed. This is the part you can pull out of the boot, in most cases a molded piece of foam. Any salesperson worth their weight will suggest replacing the manufacturer’s foot bed with a more durable product. Superfeet is the market leader for a reason. These inserts, when properly fitted for your feet, enhance the fit and feel of the boot. While firm, they provide a cushioned layer of much more substance than the foam foot bed.

The next layer is called the midsole. This layer provides the majority of the cushioning within the boot. It is either glued or stitched to the outsole. The “glued vs. stitched” options can be debated, with personal preference usually the deciding factor. Most quality midsoles will be made of polyurethane. By comparison, lightweight hikers and many trail runners have what is called an expanded vinyl acetate or EVA midsole. While this provides the wearer with more cushion when compared to polyurethane, the trade off is in durability. EVA midsoles generally won’t last as long as polyurethane.


The insole forms the next layer of the boot. This generally is made of polyurethane, nylon, or polypropylene (polypro). This is generally referred to as a protection layer. The idea being that this layer keeps the trail shrapnel from touching your socks/feet.


The part of the boot in direct contact with the trail is called the outsole. The thickness of the outsole is in direct correlation to the expected stress put upon it. Meaning, if you are caring a big heavy pack, you should have a thick outsole whereas light loads should have thinner outsoles. The outsole is covered with what are called lugs. Boots purchased for light duty should have shallow lugs, while heavy backpacking boots should have deeper lugs. In most cases, the deeper the lug, the better the traction. That is provided you’ve purchased a boot with a quality outsole, such as Vibram.
Rating: 0.00/5.00 [0]

Author Comments
primerob



Joined: 04 Mar 2004
Articles: 0
Comments: 1
 Posted: 3/18/2004, 5:33 am  Post subject: Boots

I have found that most folks buy boots that are too small for their feet. Wear the thickness of sock that you intend to hike in. Our feet tend to be smaller in the morning, so try shoes latter in the day or compensate for any stretching. Most people in the South West don't need to buy waterproof boots. Upgrade to a better quality breathable boot. The shoe size is only a starting point, actual fit is what matters. Different brands have their own sizing methods.
There are several different methods for fitting boots, get some help. A simple method is while the boot is unlaced, kick your toes to the end of the boot, you should be able to easily place 2 fingers side by side between your heel and the heel cup of the boot. This translates into toe room after you seat your heal into the heel cup.
Just my two cents worth, Rob
Rating: 0.00/5.00 [0]
primerob



Joined: 04 Mar 2004
Articles: 0
Comments: 1
 Posted: 3/18/2004, 5:33 am  Post subject: Boots

I have found that most folks buy boots that are too small for their feet. Wear the thickness of sock that you intend to hike in. Our feet tend to be smaller in the morning, so try shoes latter in the day or compensate for any stretching. Most people in the South West don't need to buy waterproof boots. Upgrade to a better quality breathable boot. The shoe size is only a starting point, actual fit is what matters. Different brands have their own sizing methods.
There are several different methods for fitting boots, get some help. A simple method is while the boot is unlaced, kick your toes to the end of the boot, you should be able to easily place 2 fingers side by side between your heel and the heel cup of the boot. This translates into toe room after you seat your heal into the heel cup.
Just my two cents worth, Rob
Rating: 0.00/5.00 [0]
 

Page 1 of 1
All times are GMT - 7 Hours

Jump to:  
You cannot post articles in this chapter
You cannot edit your articles in this chapter
You cannot delete your articles in this chapter
You cannot rate articles in this chapter

You cannot post comments in this chapter
You cannot edit your comments in this chapter
You cannot delete your comments in this chapter
You cannot rate comments in this chapter
You cannot approve comments in this chapter